Toshiba B-570 SERIES - Manual (Page 49)

2-1
2. SUPPLY SPECIFICATIONS EM10-33006A
Tag Paper
50.8 ~ 140.0
0.15 ~ 0.29
200.0 max.
I-BEST S / I-BEST W
Thermal Label
50.8 ~ 140.0
0.13 ~ 0.17
200.0 max.
RICOH: 140LA / OSAKA SEALING: C6TB
Type
Item
Width (mm)
Length (mm)
Thickness (mm)
Outer roll diameter (mm)
Recommended paper
2. SUPPLY SPECIFICATIONS
Information regarding the supply specifications contained in Product Description is essential to service
engineers. Detail specifications and other information on the media and ribbon are described in Supply
Manual by model. It is issued by and sent from TOSHIBA TEC H.Q. (Sales Division) upon release of new
model or manual's revision. When purchasing the supplies locally, be sure to refer to the Supply Manual
for details, or trouble may occur. Be sure to read carefully and understand the Supply Manual since it
also includes the details about notes, precision of the print start position, limitations on printing, etc.
2.1 MEDIA
L=
(D -d ) x
π
4t
2 2
(Revision Date Aug. 10, '95)
2.1 MEDIA
Batch
10.0 ~ 999.0
On-demand
25.4 ~ 999.0
Auto-cut
38.0 ~ 999.0
NOTES: 1. When rewinding the media onto the take-up spool in batch mode, the max. outer roll
diameter should be 180 mm.
2. When cutting the thermal label, secure a gap of 6 mm or more and cut in the middle of
the gap.
3. The thermal paper used for direct thermal printing must not have the specifications which
exceed Na + 800 ppm, K + 250 ppm and CI - 500 ppm.
4. Some ink used on pre-printed labels may contain ingredients which shorten the print
head's product life. Do not use labels pre-printed with ink which contain hard substances
such as carbonic calcium (CaCO
3
) and kaolin (Al
2
O
3
, 2SiO
2
, 2H
2
O).
5. The label should be at least three times as long as the detection gap.
6. Relations between media roll length and core diameter.
L: Media length d: Media core outside diameter
D: Max. roll diameter t: Media thickness
7. Use of media with a width less than the minimum media width may shorten the print head
life.
1) Thermal Label
Fig. 2-1 Fig. 2-2
Backing
Paper
Label
1.5 mm 1.5 mm
47.8 ~ 137.0 mm
50.8 ~ 140.0 mm
10.0 ~ 999 mm
2.0 ~ 20.0 mm
Max.
Ø200.0 mm
76.2 mm
Label Backing Paper
On-demand
10.0 ~ 999.0
Auto-cut
25.4 ~ 999.0