Toshiba B-570 SERIES - Manual (Page 50)

2-2
2. SUPPLY SPECIFICATIONS EM10-33006A
2) Tag Paper
NOTE: The reflection rate of the black mark is 10% or less at wavelength of 950 nm. A square hole
can substitute for the black mark. When the square hole is used, no printing is allowed on the
back side.
NOTE: Max. effective print area is 128.0 mm (W) x 995 mm (L) for label, 128.0 mm (W) x 997 mm (L)
for tag paper.
3) Relationship between the head effective print width and paper
(Revision Sep. 25, '95)
2.1 MEDIA
2.0 ~ 10.0 mm
10.0 ~ 999 mm Min. 12 mm
Black Mark
50.8 ~ 140.0 mm
Print Side
Max.
Ø200.0 mm
76.2 mm
Printing Area
2 mm
2 mm
1.5 mm 1.5 mm
Cut Position
1.0 mm
1.0 mm
1.5 mm 1.5 mm
Black Mark
Fig. 2-4 Fig. 2-3
Fig. 2-6 Fig. 2-5
Printing Area
128.0 mm
±
0.2 mm
140 mm
(Maximum paper width)
Outside the print range
6 mm
Head effective print width
Outside the print range
6 mm