2 cutter module (b-4205-qm) - 3 – Toshiba B-570 SERIES User Manual
Page 80
3-3
EM18-33010A
3. INSTALLATION PROCEDURE FOR THE OPTIONAL EQUIPMENT
5.
Unclamp and disconnect the connector for the strip sensor from CN6 on the CPU PC board.
6.
Remove the SM-4x6B screw to detach the strip sensor (LED)/(Tr).
Fig. 3-3
Fig. 3-4
(Revision Date: Feb. 10, 2000)
3.2 CUTTER MODULE (B-4205-QM)
NOTE: For the B-570 series, the take-up/cutter harness enclosed with the B-4205-QM is not used but
the take-up harness connected to CN2 on the PWM PC board.
1.
Remove the top cover and left side cover. (See Fig. 2-1.)
2.
Remove the I/F PC board. (See Fig. 2-2.)
3.
Remove the front plate. (See Fig. 2-6.)
4.
Remove the screw (SM-4x8B) and two connectors to detach the operation panel.
Description
Q’ty/Unit
Description
Q’ty/Unit
Cutter Unit
1
Cutter Attaching Screw
2
Cutter Cover
1
Screw (FL-4x6)
1
Take-up/Cutter Harness
1
Cleaner
1
Screw (SM-4x8B)
Connector
Operation Panel
Connector (CN6)
CPU PC Board
Clamp
Strip Sensor (Tr)
Screw (SM-4x6B)
Strip Sensor (LED)