Tascam DP-008 - Manual (Page 79)

TASCAM DP-008
79
13 – Messages
The following popup messages alert you to conditions that may arise while you are using the unit.
Consult this table if you see something you do not understand.
Messages Meaning and remedy
Empty Export Track You are trying to export a track ("Track import and export" on page 74)
which does not have anythng recorded on it. Pick another tarck to eport.
File Not Found You are trying to restore a song when there are no backed-up songs on
the FAT partition ("Song backup and restoration" on page 73).
I/O Too Short You are trying to enter repeat mode, but the time between the IN and
OUT points is too short. Make the time longer.
Import File Not Found You are trying to import a WAV file from the FAT partition when there are
no WAV files there ("Importing tracks" on page 75). Connect the unit to a
PC and transfer some files to the FAT partition for import.
Import File Too Large You are trying to import a WAV file from the FAT partition that is too large
for the remaining space on the partition. Free up some space on the
(active) partion and try again.
In Bounce Mode You tried to perform an action that cannot be done while in Bounce mode.
In Master Mode You tried to perform an action that cannot be done while in Master mode.
In Repeat Mode You tried to perform an action that cannot be done while in Repeat mode.
In Punch Mode You tried to use a function that is prohibited during punch in/out mode.
Master Track Not Found You have tried to export a stereo master track ("Exporting a stereo master
track" on page 77) when the song does not have one. Master the song
and then export the stereo master track.
Master Track Too Large You tried to export a stereo master track which was too large for the
remaining space on the FAT partition ("Exporting a stereo master track" on
page 77). Connect the unit to a computer and free up some space on the
FAT partition or reformat the FAT partition.
No Armed Track You tried to enter auto punch in/out mode when no tracks were in record
standby. (See “Automatically punching in and out” on page 56.)
Put a track into recording standby before enabling auto punch in/out
mode
No Disk Space You tried to create a song, but there is not enough space on the partition
to create a song. Erase an unwanted song (see “Erasing songs” on page
XX), format the card (see “Formatting cards and setting partition sizes” on
page XX) or take other steps to make space available on a card.
No Master Trk You have tried to use a non-existent master track as the source in a track
cloning operation ("CLONE track (track duplication)" on page 62). Select
another source or master the song and try again.
No Song You are trying to load a song from a partition that has no songs on it
("Loading a saved song" on page 37). Change partitions ("Selecting the
active partition" on page 36).
No Undo History There are no actions to be undone. See "Undoing operations" on page
49.
Not Stopped The recorder is moving (not stopped, but playing back, recording, etc.)
and you have pressed a key such as the
UN/REDO key which cannot
be used until you press STOP.
Now Recording You are trying to perform an action which cannot be done while recording.