Tascam DP-008 - Manual (Page 14)

14
TASCAM DP-008
Connecting and setting the input
sources
1 Connect an electric guitar to the INPUT A
connector on the rear panel.
Guitar
2 Set the MIC/LINE-GUITAR switch on the
rear panel to GUITAR .
TIP
When connecting an electric-acoustic guitar
with a built-in preamp or an active electric
guitar, as well as when connecting an
electric guitar with effect boxes between
it and this unit, set the MIC/LINE–GUITAR
switch to MIC/LINE.
3 Press the INPUT SETTING key to open the
INPUT SETTING
screen.
On this screen you can set the input
sources for both
INPUT A
and
INPUT B
.
At first, the input source for
INPUT A
is
already selected.
4 Use the DATA wheel to change the
INPUT
A
input source to
Ext.Input, LINE/ Low
.
5 Press the F4 (¶) key to select the current
input for
INPUT B
.
6. Use the DATA wheel to set the
INPUT B
input source to
Internal MIC / Low
or
Internal MIC / High
.
2 – Quick Start Guides