Recording guitar to track 1, Listening to your recording, 2 – quick start guides – Tascam DP-008 User Manual

Page 16

TASCAM DP-008

OL indicator

When you play the guitar, the input level is

shown by the

(INPUT A) and

(

TRACK 1

)

meters on the display.

Turn up the

TRACK 1 LEVEL

and

MASTER

LEVEL

knobs and the

VOLUME

dial to hear the

guitar sound through headphones. When doing

so, the

and

meters on the right side of the

display become active.

NOTE

You can use the TRACK 1 PAN knob to

•

adjust the stereo position of the signal

when monitoring.
The input signal cannot be monitored if

•

the REC indicator of the TRACK 1 that it is

assigned to is not lit.

Recording guitar to TRACK 1

1 Press the playback (Á) key while

pressing and holding the record (–) key

to start recording. The

TRACK 1

REC

key

stops blinking and stays lit constantly.

TRACK 1 REC indicator

You are recording. Play your guitar!

2 When you are finished, press the stop

(ª) key to stop recording.

3 Press the

TRACK 1

REC

key again. Its

light turns off.

Listening to your recording

1 To go to the beginning of the song, press

the Ô key while pressing and holding

the stop (ª) key. (This is the Return To

Zero (RTZ) function)

2 Press the playback (Á) key to play the

recorded track.

3 Use the

TRACK 1

LEVEL

knob and the

MASTER LEVEL

knob to adjust the

playback level. Use the

VOLUME

dial to

adjust the final monitoring volume.

2 – Quick Start Guides