Tascam DP-008 - Manual (Page 66)

66
TASCAM DP-008
The default setting is
100
.
Use the F3 (§) and F4 (¶) keys to select
parameters, and use the DATA wheel to
set the parameter values.
Use the F2 (
ON
) key to turn the output
ON and OFF.
Use the F1 (
CHROM
) key to change to
chromatic tuner mode.
3 When you have finished tuning, press the
HOME key to return to the Home Screen.
Turning the power off
automatically
You can set the time until the power
automatically turns OFF after the last use
when using the batteries.
1 When the recorder is stopped, press the
MENU key to open the
MENU
screen.
2 Select
PREFERENCE
and press the F4 (¥)
key to open the
PREFERENCE
screen.
3 Use the F3 (§) and F4 (¶) keys to select
the
Auto Off
setting value, and turn the
DATA wheel to choose from these options:
OFF
(initial setting, Auto Off does not
occur),
3min
,
5min
,
10min
,
30min
4 When finished making settings, press the
HOME key to return to the Home Screen.
Restoring the initial
preference settings
You can restore the
PREFERENCE
screen
settings to their initial values (the values that
they had when the unit was shipped from the
factory). This operation is called initialization.
1 When the recorder is stopped, press the
MENU key to open the
MENU
screen.
2 Turn the DATA wheel to select
PREFERENCE
, and press the F4 (¥) key to
open the
PREFERENCE
screen.
3 Use the F3 (§) and F4 (¶) keys to select
Exec
next to the
Initialize
item.
Press F2 (
EXEC
) to open a confirmation
screen.
4 Press F3 (
YES
) to initialize the unit. The
PREFERENCE
screen reopens when the
process finishes.
NOTE
Press the F4 (NO) key to cancel initialization.
5 When finished, press the HOME key to
return to the Home Screen.
Viewing information
You can view information about the current
song, the SD card and the firmware.
1 Press the
MENU key to open the
MENU
screen.
2 Turn the DATA wheel to select
INFORMATION
and press the F4 (¥) key.
9 – Miscellaneous Functions