Record vocals on track 3, 2 – quick start guides – Tascam DP-008 User Manual
Page 18
18
TASCAM DP-008
TRACK 2 REC indicator
5 Return to the beginning of the song and
begin playback. Play the lead guitar part
along with the already recorded rhythm
guitar.
Raise the
TRACK 2 LEVEL
knob to hear
the sound of the guitar being input
along with the
TRACK 1
playback sound
through the headphones.
6 Use the
TRACK 1
and
2 LEVEL
and
PAN
knobs, the
MASTER LEVEL
knob and the
VOLUME
dial as necessary to adjust the
monitoring levels and balance.
7 Return to the start of the song again
and press the playback (Á) key while
pressing and holding the record (–) key
to start recording. The
TRACK 2
REC
key
stops blinking and stays lit constantly.
You are recording again. Play your
guitar!
8 When you are finished, press the stop
(ª) key to stop recording.
9 Press the
TRACK 2
REC
key again. Its
light turns off.
Record vocals on TRACK 3
1 Press
ASSIGN
to open the
INPUT ASSIGN
screen.
2 Press the
TRACK 3 REC
key to set the
TRACK 3 SOURCE
to
B
.
2 – Quick Start Guides