Tascam DP-008 - Manual (Page 62)

62
TASCAM DP-008
OPEN TRK (
• 1
to
8
,
1
/
2
,
3
/
4
,
5
/
6
,
7
/
8
,
1
-
8
,
ALL
)
IN/OUT
•
CUT (remove part)
OUT IN
IN
This function cuts (deletes) the audio data
between the IN and OUT points on the
selected track, and shifts the remaining
recording after the OUT point forward to the
IN point. Therefore, the track becomes shorter.
The following parameters are used in this
operation.
CUT TRK (
• 1
to
8
,
1
/
2
,
3
/
4
,
5
/
6
,
7
/
8
,
1
-
8
,
ALL
)
IN/OUT
•
SILENCE (part erase)
OUT
OUT
IN
IN
This function cuts (deletes) the audio data
between the IN and OUT points on the
selected track, leaving silence between the IN
and OUT points, as though there had been no
recording.
This operation does not change the length of
the track.
The following parameters are used in this
operation.
SILENCE TRK (
• 1
to
8
,
1
/
2
,
3
/
4
,
5
/
6
,
7
/
8
,
1
-
8
)
IN/OUT
•
TIP
Using this function, you can delete short
noises, for example.
CLONE track (track
duplication)
Use this function to duplicate a single track,
a track pair or the master track on a different
track or track pair. Each track is copied
entirely, so the IN/OUT/TO points have no
effect.
The following parameters are used in this
operation.
SOURCE TRK (
• 1
to
8
,
1
/
2
,
3
/
4
,
5
/
6
,
7
/
8
,
MST
)
8 – Editing Tracks