Playing and mixing the demo song, 2 – quick start guides – Tascam DP-008 User Manual

Page 11

TASCAM DP-008

or insert the card. If you remove or insert

the SD card when the unit’s power is

on, the unit cannot shut down properly

and all unsaved data and settings will be

lost. These data and settings cannot be

recovered.
Do not remove the batteries or

•

disconnect the power cable while the

unit power is ON.
The included alkaline batteries are for

•

confirming operation of the unit and

might not last very long.
Before turning the power ON, completely

•

turn down the volume of headphones

and monitoring systems connected to the

unit.

TIP

This unit can also be powered by a

•

PS-P520 power adaptor (sold separately)

(see “Connecting an AC adaptor (sold

separately)” on page 32).
You can monitor recordings using

•

speakers by connecting an amplifier or

powered speakers to the LINE OUT jacks.

Playing and mixing the demo

song

Before the unit is shipped, a demo song is

stored on its SD card. We are now going to use

basic playback and mixing features with this

demo song.
1 Press the

HOME

key to open the Home

Screen.

2 When the Home Screen is open, press the

key to open the

screen.

3 Use the

DATA

wheel to select the

SONG

menu, and press the

(¥) key to open

the

SONG

menu screen.

4 Rotate the

DATA

wheel to select

LOAD

, and

press the

F4 (

)

key to open the

SONG

LOAD

screen that shows a list of songs.

2 – Quick Start Guides