Exporting tracks, 11 – exchanging data with a computer – Tascam DP-008 User Manual

Page 76

TASCAM DP-008

Exporting tracks

You can export tracks as 16-bit, 44.1-kHz

mono WAV files.
1 When the recorder is stopped, press the

key to open the

screen.

2 Turn the

DATA

wheel to select

IMPORT/

EXPORT

, and press the

(¥) key to open

the

IMPORT/EXPORT

menu.

3 Turn the

DATA

wheel to select the

EXPORT

TRACK

item, and press the

(¥) key.

Song tracks that have audio recordings are

displayed in a list. The file name makes

the source track number clear.

TIP

Press F3 (NAME) to change the file name.

NOTE

Song tracks that do have audio recordings

are not displayed in the file list.

4 Turn the

DATA

wheel, to select a track for

export, and press the

(

✔

) key to put a

check in the checkbox.

By checking multiple checkboxes, you

can export more than one track at once.
Select a track and press the

(

✔

)

key again to remove the check from its

checkbox.

5 When you finish putting checks next to

the tracks that you want to export, press

the

F2 (

)

key.

The amount or open space on the FAT

partition (which is the destination for the

exported tracks) and the total number of

tracks to be exported is shown.

6 Press the

F4 (

EXEC

)

key. The selected

track is exported to the FAT partition

with the edited file name with the

“.WAV” extension added as the track file

name. If you have previously exported a

track file with the same name, a confir-

mation message (“

Duplicate name

–

Are

you sure?

”) appears. Press the

F3 (

YES

)

key to overwrite the older track.

7 Press the

HOME

key to return to the

Home Screen.

8 Connect this unit to a computer (see

“Connecting with a computer” on page

71).

11 – Exchanging Data with a Computer