2 – quick start guides – Tascam DP-008 User Manual
Page 21
TASCAM DP-008
21
2 Play the song back, and press the
F4 (
OUT
)
key at the position where you want the
stereo master track end point.
“
SET OUT !
” appears and this position is
set as the OUT point, which will be the end
point of the master.
TIP
You can also set the OUT point when
playback is stopped by pressing the F4 (OUT)
key.
3 Press the
F1
(
EXIT
) key (or
HOME
key) to
return to the Home Screen.
4 Press the
REC MODE
key to open the
RECORDER MODE
screen.
5 Turn the
DATA
wheel to select
MASTER
REC
.
6 Press the
F4 (
EXEC
)
key to put the unit
into master recording mode and return
to the Home Screen.
2 – Quick Start Guides