Tascam DP-008 - Manual (Page 51)

TASCAM DP-008
51
Erasing the operation history
When the power is turned OFF, the operation
history of the currently loaded song is erased
(cleared). The operation history is not restored,
so past operations cannot be undone or redone
when the power is turned ON again.
NOTE
The operation histories of songs that are not
loaded are not erased when the power is
turned OFF.
You can also erase (clear) the operation history
of the currently loaded song without turning
the power OFF.
1 Press the
HISTORY key to open the
HISTORY
screen.
2 Press the F4 (
CLEAR
) key. A confirmation
message appears.
3 Press the F3 (
YES
) key. A confirmation
message appears again.
4 Press the F3 (
YES
) key to clear the
operation history and erase unused data.
The Home Screen reopens when this
operation completes.
To cancel erasing the operation history,
•
press the F4 (
NO
) key.
TIP
If you open the HISTORY screen immedi- •
ately after erasing the operation history,
the event (operation) that appears is “0”
(START UP), showing that the operation
history has been cleared.
If you want to keep the operation history
•
even when you power OFF, turn song
protect ON before turning the power
OFF (see “Protecting songs” on page 40).
CAUTION
You cannot undo erasing the operation
history! Only do it if you are certain about
it.
6 – Basic Recording