Tascam DP-008 - Manual (Page 47)

TASCAM DP-008
47
TIME 0.2 (0.8 for plate type) –
3.2 seconds
(Default: 1.8 sec)
LEVEL
0 – 100 (Default: 80)
Use
TYPE
to set the type of reverb.
Use
TIME
to adjust the reverb time
(depth).
Use
LEVEL
to adjust the amount (volume)
of the reverb.
The signal after the reverb effect is applied
(return signal) is mixed into the stereo
signal.
3 After making the reverb settings, press
the HOME key to return to the Home
Screen.
4 Use the track REVERB knobs to adjust
the amount of signal sent to the reverb
effect from each track.
NOTE
The reverb default values are as follows.
TYPE
Default values
TIME LEVEL
Hall 1
1.8 80
Hall 2
2.2 80
Room
1.4 10
Studio
0.6 20
Plate 1 1.4 60
Plate 2 1.8 60
When the setting value is the same as the
default value, INI appears below the setting
value.
Muting tracks
1 Press the EQ key and REVERB key at
the same time to open the
TRACK MUTE
screen.
2 Press the REC key of a track to turn
mute ON or OFF. When mute is ON, the
track number is shown in inverse (dark
number on light background).
3 After muting the tracks as desired, press
the HOME key to return to the Home
Screen.
NOTE
When mute is ON for a track, the track
number is shown on the Home Screen in
inverse (dark number on light background).
Track mute ON indication
6 – Basic Recording