Using repeat playback, Setting the interval between repetitions, Locating to the in or out point – Tascam DP-008 User Manual

Page 56: Automatically punching in and out, Rehearsal, Setting the interval between, Repetitions, 7 – recorder functions

TASCAM DP-008

During repeat playback

•

In auto punch in/out mode

•

When the recorder mode is MASTER REC

•

or MASTER PLAY

Using repeat playback

1 Set the starting (IN) and ending (OUT)

points for the time that you want to

repeat, and then return to the Home

Screen.

2 Press the

REPEAT

key to start repeat

playback.

The repeat icon on the Home Screen

appears.

Repeat icon

Playback starts from the IN point. When

the OUT point is reached, after the repeat

interval elapses, playback starts again

from the IN point. Playback continues to

repeat between the IN and OUT points.

3 Press the

REPEAT

key again to stop

repeat playback.
The repeat icon on the Home Screen

disappears.

The next section explains how to set the repeat

interval that determines the amount of time

until playback starts again after the OUT point

is reached.

Setting the interval between

repetitions

The interval can be set from 1.0 to 9.9

seconds.

1 Press the

key to open the

screen.

2 Turn the

DATA

wheel to select

PREFERENCE

, and press the

(¥) key to

open the

PREFERENCE

screen.

3 Use the

(§) and

(¶) keys to select

the setting value for the

Repeat Int

item. Turn the

DATA

wheel to set the

value from 1.0 to 9.9 sec. in 0.1-sec. units.
The default setting is

1.0sec

4 When finished making settings, press the

HOME

key to return to the Home Screen.

Locating to the IN or OUT point

When the Home Screen is open, press the

key while pressing and holding the

STOP

key to locate to the IN point.

Press the

key while pressing and

holding the

STOP

key to locate to the

OUT point

Automatically punching in

and out

When an IN point and an OUT point are

set, press the record (º) key and the

IN/

OUT

key at the same time to enter auto

punch in/out mode.

Auto punch in/out mode includes a rehearsal

function. When using this function, monitoring

between the IN and OUT points in the same

way as when recording is possible without

actually recording.

Rehearsal

1 Press the

REC

keys on tracks to use auto

punch in/out with them.

7 – Recorder Functions