Tascam DP-008 - Manual (Page 25)

TASCAM DP-008
25
9 EQ key
Press this key to open the track EQ setting
screen. (See “Track EQ (equalizer)” on
page 45.)
Press this key and
REVERB key at the
same time to open the
TRACK MUTE
screen. (See “Muting tracks” on page 47.)
0 LCD Display
This shows various information.
q REVERB knobs (TRACK 1 - TRACK 8)
Use to adjust the amount (volume) of the
track playback signal or assigned input
signal that is sent to the reverb effect.
w PAN knobs (TRACK 1 - TRACK 8)
Use to adjust the stereo position of the
track playback signal or assigned input
signal. (See “Stereo position (panning)”
on page 45.)
e LEVEL knobs (TRACK 1 - TRACK 8)
Use to adjust the monitoring level of the
track playback signal or assigned input
signal. (See “Level and balance” on page
45.)
r REC keys and indicators (TRACK 1 -
TRACK 8)
Use to arm a track for recording (turn
recording ON/OFF). To monitor a track’s
input sound through headphones or a
monitoring system, press that track’s REC
key. When the REC key is ON, the REC
indicator blinks while the unit is stopped
and lights during recording.
t Function keys
The functions of these keys are shown at
the bottom of the screen and depend on
the current screen.
NOTE
In this manual, the four function keys are •
referred to as F1, F2, F3 and F4 in order
from left and right.
The function keys have the following
•
assignments on the Home Screen.
Stop ( ª ) + F1: Locate to the IN point
Stop ( ª ) + F2: Locate to the OUT point
F3: Set the IN point
F4: Set the OUT point
y DATA wheel
Use this to change parameter values when
using menus.
u MENU key
Press this key to open the
MENU
screen.
i HOME key
Press this key to open the Home Screen.
When the unit is stopped and the Home
Screen is open, this key is used to move
between the time divisions in the counter.
(See “Direct locate function” on page 54.)
o METRONOME key
Press this key to open the
METRONOME
setting screen. (See “Metronome” on page
64.)
p TUNER key
Press this key to open the
TUNER
screen.
(See “Tuner” on page 64.)
a UN/REDO key and indicator
Press this to undo the last action. Press
again to redo it. (See “Undoing operations
(undo)” on page 49.)
The
UN/REDO indicator lights when
single undo or multi-undo has been
conducted and there are undone
operations that can be redone.
s HISTORY key
Press this key to show the recording/
editing history. Use this screen to undo
multiple operations at the same time with
the multi-undo function.
d Ô /RTZ key
Press this key when the transport is
stopped or playing to fast rewind. Press
it again to change the speed from 10x to
50x, again for 100x and 1000x.
If you press this key while holding down
the stop ( ª ) key, the transport will
locate to the head of the song (RTZ).
(See “Return To Zero (RTZ) and Last
Recording Position (LRP)” on page 54.)
f Stop ( ª ) key
Press this key alone to stop recording,
playback, fast forward and fast rewind.
If you press the Ô or  key at
the same time, the transport will also
3 – Names and Functions of Parts