Specifying serverpush output information, About serverpush output information, Accessing these settings – TANDBERG CONTENT SERVER D13898.04 User Manual
Page 50: The serverpush output information settings
0
TANDBERG
CONTENT SERVER
USER GUIDE
D 13898.04
DECEMBER 2006
Specifying ServerPush Output Information
Administrator Settings > Template Editor > Windows Media Writer
In the
, click on
ServerPush
to pro-
duce the
ServerPush Information
.
The ServerPush Output Information Settings
About ServerPush Output Information
The ServerPush method, or pushing
the live stream to the Windows Media
streaming server is the default stream-
ing option on the Content Server.
Server name
.
The default server name if you are
using the TANDBERG Content Server Windows Media
streaming server is (local).
For streaming off an external streaming server,
enter the server name or IP address of your external
Windows Media streaming server
Accessing these Settings
Port
. The default port if you are using the
TANDBERG Content Server Windows Media
streaming server is 8080. For streaming off an
external streaming server, enter the port to be used
with your external Windows Media streaming server.
You may change the title by following instruc-
tions described for
.
Password confirm
. Type the password again to confirm.
Username & Password
. For streaming off an
external streaming server, enter the username &
password to be used for authentication with your
external Windows Media streaming server.
Publishing point copy
. If you have set up a
publishing point on an external Windows Media
streaming server, you can copy the parameters for
your new publishing point
by specifying the Publishing point copy. If your
publishing point on the Windows Media streaming
server is called “my_publishing_point”, enter my_
publishing_point in the Publishing point copy field.
You also need to fill in the name of your multicast
template in this field for multicast content delivery.