For your protection please read these safety
instructions completely before you connect
the equipment to the power source. Carefully
observe all warnings, precautions and
instructions both on the apparatus and in these
operating instructions.
Retain this manual for future reference.

Water and Moisture

Do not operate the apparatus under or near
water – for example near a bathtub, kitchen
sink, or laundry tub, in a wet basement, near
a swimming pool or in other areas with high
humidity.
Never install jacks for communication cables
in wet locations unless the jack is specifically
designed for wet locations.
Do not touch the product with wet hands.

Cleaning

Unplug the apparatus from communication
lines, mains power-outlet or any power source
before cleaning or polishing. Do not use liquid
cleaners or aerosol cleaners. Use a lint-free
cloth lightly moistened with water for cleaning
the exterior of the apparatus.

Ventilation

Do not block any of the ventilation openings
of the apparatus. Never cover the slots and
openings with a cloth or other material. Never
install the apparatus near heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
Do not place the product in direct sunlight or
close to a surface directly heated by the sun.

Lightning

Never use this apparatus, or connect/
disconnect communication cables or power
cables during lightning storms.

Dust

Do not operate the apparatus in areas with high
concentration of dust.

Vibration

Do not operate the apparatus in areas with
vibration or place it on an unstable surface.

Power Connection and Hazardous Voltage

The product may have hazardous voltage
inside. Never attempt to open this product,
or any peripherals connected to the product,
where this action requires a tool
This product should always be powered from
an earthed power outlet
Never connect attached power supply cord
to other products
In case any parts of the product has visual
damage never attempt to connect mains
power, or any other power source, before
consulting service personnel
The plug connecting the power cord to the
product/power supply serves as the main
disconnect device for this equipment. The
power cord must always be easily accessible
Route the power cord so as to avoid it being
walked on or pinched by items placed upon
or against it. Pay particular attention to the
plugs, receptacles and the point where the
cord exits from the apparatus
Do not tug the power cord
If the provided plug does not fit into your
outlet, consult an electrician
Never install cables, or any peripherals, without
first unplugging the device from it's power source.

•

•
•

•

Servicing

Do not attempt to service the apparatus
yourself as opening or removing covers may
expose you to dangerous voltages or other
hazards, and will void the warranty. Refer all
servicing to qualified service personnel.
Unplug the apparatus from its power source
and refer servicing to qualified personnel under
the following conditions:

If the power cord or plug is damaged or
frayed
If liquid has been spilled into the apparatus
If objects have fallen into the apparatus
If the apparatus has been exposed to rain
or moisture
If the apparatus has been subjected to
excessive shock by being dropped
If the cabinet has been damaged
If the apparatus seems to be overheated
If the apparatus emits smoke or abnormal
odor
If the apparatus fails to operate in
accordance with the operating instructions.

•

•
•
•

•

•
•
•

•

Accessories

Use only accessories specified by the
manufacturer, or sold with the apparatus.

Communication Lines

Do not use communication equipment to report
a gas leak in the vicinity of the leak.

Safety Instructions