Toshiba LF516 - Manual (Page 69)

68
6 F 8 A 0 9 3 4
Switch operation Display example Description
Pushing returns you to the setting
menu.
● Changing the range type
The range type should be set before changing the span.
The following is an example to change the range type from Single range (SINGLE) to
Bidirectional automatic selection of multiple ranges (2F-2R).
Switch operation Display example Description
Select "R TYPE" from the setting item
selection menu.
The currently set range type (SINGLE in
this example) appears.
Then push .
* Pushing returns you to the setting
menu.
The switches at the bottom change.
( are shown.)
At the same, the cursor appears.
(The item indicated by the cursor is
highlighted.)
Then push .
You can continue to change the setting item.
Push to change the selection
items.
: Selected item is scrolled up.
: Selected item is scrolled down.
Perform this operation to change the setting
to 2F-2R.
When the item is changed to the desired
item, push to set the item
temporarily.