Toshiba LF516 - Manual (Page 104)

103
6 F 8 A 0 9 3 4
9. Mag-Prover-Calibration
9.1 Calibration Items
When you check or calibrate the converter or check the excitation current, you have to change the mode to
the calibration mode.
You can check or change the zero and span of the converter and the excitation current value as described
below.
However, calibration is already performed when shipped from the factory. Do not perform
change calibration unless it is specificity required.
Items Function items Display example
9.2.1 0 % flow rate calibration CAL 0%
9.2.2 50 % flow rate calibration CAL 50%
9.2.3 100 % flow rate calibration CAL 100%
9.2.4 Checking the excitation current output EXC DSPL