Transition Networks SISGM1040-162D User Manual
Page 87
Transition Networks
SISGM1040-162D-LR
Technical Support: 1-800-260-1312
International: 00-1-952-941-7600
80
802.1Q Configuration
1. Enable GVRP Protocol: check the check box to enable GVRP protocol.
2. Select the port that you want to configure.
3. Link Type: There are 3 types of link type.
Access Link: Single switch only, allows user to group ports by setting the
same VID to those ports.
Trunk Link: The extended application of Access Link. While the ports are set
in this type, they can forward the packets with specified tag among the switches
which are included in the same VLAN group.
Hybrid Link: Both Access Link and Trunk Link are available.
4. Untagged VID: assign the untagged frame VID.
5. Tagged VID: assign the tagged frame VID.
6. Click
Apply
7. You can see each port setting in the below table on the screen.
Group Configuration
Edit the existing VLAN Group.
1. Select the VLAN group in the table list.
2. Click
Edit