Transition Networks SISGM1040-162D - Manual (Page 66)

Transition Networks SISGM1040-162D-LR
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
59
System Event Log—Event Configuration
You can select the system log events and SMTP events. When selected events occur,
the system will send out the log information. Also, per port log and SMTP events can be
selected. After configuring, Click Apply .
System event selection: 4 selections – Device cold start, Device warm start,
SNMP Authentication Failure, and X-ring topology change. Mark the checkbox to
select the event. When selected events occur, the system will issue the logs.
Device cold start: When the device executes cold start action, the system will
issue a log event.
Device warm start: When the device executes warm start, the system will
issue a log event.
Authentication Failure: When the SNMP authentication fails, the system will
issue a log event.
X-ring topology change: When the X-ring topology has changed, the system
will issue a log event.
Port event selection: Select the per port events and per port SMTP events. It has
3 selections – Link UP, Link Down, and Link UP & Link Down. Disable means no
event is selected.
Link UP: the system will issue a log message when port connection is up only.
Link Down: the system will issue a log message when port connection is down
only.
Link UP & Link Down: the system will issue a log message when port
connection is up and down.