Transition Networks SISGM1040-162D - Manual (Page 56)

Transition Networks SISGM1040-162D-LR
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
49
IP Configuration
User can configure the IP Settings and DHCP client function
DHCP Client: Enable or disable the DHCP client function. When DHCP client
function is enabled, the industrial switch will be assigned an IP address from the
network DHCP server. The default IP address will be replaced with an IP address
which is assigned by the DHCP server. After user click “Apply” button, a pop-up
dialog show up. It is to inform the user that when the DHCP client is enabled, the
current IP will lose and user should find the new IP on the DHCP server.
IP Address: Assign the IP address that the network is using. If DHCP client function
is enabled, then user needn’t assign the IP address manually. Instead, the network
DHCP server will assign the IP address for the industrial switch and display it in this
column. The default IP is 192.168.1.77
Subnet Mask: Assign the subnet mask of the IP address. If DHCP client function is
enabled, and then user needn’t assign the subnet mask manually
Gateway: Assign the network gateway for the industrial switch. The default gateway
is 192.168.1.254
DNS1: Assign the primary DNS IP address.
DNS2: Assign the secondary DNS IP address.
And then, click Apply
IP configuration interface