Transition Networks SISGM1040-162D - Manual (Page 37)

Transition Networks SISGM1040-162D-LR
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
30
[TaggedVID List] switch(vlan)#vlan 8021q trunk 3
hybrid-link untag 5 tag 6-8
show vlan [GroupID]
or
show vlan
V Show VLAN
information
switch(vlan)#show vlan 23
no vlan group
[GroupID]
V Delete port base
group ID
switch(vlan)#no vlan group 2
Spanning Tree Commands Set
Command Level Description Example
spanning-tree enable G Enable spanning tree switch(config)#spanning-tree
enable
spanning-tree priority
[0~61440]
G Configure spanning
tree priority parameter
switch(config)#spanning-tree
priority 32767
spanning-tree max-age
[seconds]
G Use the spanning-tree
max-age global
configuration
command to change
the interval between
messages the
spanning tree receives
from the root switch. If
a switch does not
receive a bridge
protocol data unit
(BPDU) message from
the root switch within
this interval, it
recomputed the
Spanning Tree
Protocol (STP)
topology.
switch(config)#spanning-tree
max-age 15