Transition Networks SISGM1040-162D - Manual (Page 82)

Transition Networks SISGM1040-162D-LR
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
75
Rate Limiting
You can set up every port’s bandwidth rate and frame limitation type.
Ingress Limit Frame type: Select the frame type that you expect to filter. The
frame types have 4 options for selecting: All, Broadcast/Multicast/Flooded
Unicast, Broadcast/Multicast and Broadcast only.
Broadcast/Multicast/Flooded Unicast, Broadcast/Multicast and Bbroadcast
only types are selectable for ingress frames. But, the egress rate only supports ’All’
frame type.
Rate Limiting interface
All the ports support ingress and egress rate control which can be selected from
160kbps to 128000kbps. The switch will perform the ingress/egress rate by packet
counter to meet the specified rate.
Ingress: Select the port effective ingress rate (The default value is “0”)
Egress: Enter the port effective egress rate (The default value is “0”)
And then, click Apply to apply the settings.