Transition Networks SISGM1040-162D - Manual (Page 107)

Transition Networks SISGM1040-162D-LR
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
100
Security
In this section, you can configure 802.1x and MAC address table.
802.1X/Radius Configuration
802.1x is an IEEE authentication specification that prevents the client from accessing the
wireless access point or wired switch until it provides authority, like the user
name/password that are verified by an authentication server.
System Configuration
After enabling the IEEE 802.1X function, you can configure the parameters of this
function.
1. IEEE 802.1x Protocol: Enable or disable 802.1x protocol.
2. Radius Server IP: Set the Radius Server IP address.
3. Server Port: Set the UDP destination port for authentication requests to the
specified Radius Server.
4. Accounting Port: Set the UDP destination port for accounting requests to the
specified Radius Server.
5. Shared Key: Set an encryption key for using during authentication sessions with
the specified radius server. This key must match the encryption key used on the
Radius Server.
6. NAS, Identifier: Set the identifier for the radius client.
7. Click Apply .