Login in the console interface – Transition Networks SISGM1040-162D User Manual

Page 25

Transition Networks

SISGM1040-162D-LR

Technical Support: 1-800-260-1312

International: 00-1-952-941-7600

When the connection between Switch and PC is ready, turn on the PC and run a

terminal emulation program or Hyper Terminal and configure its communication

parameters to match the following default characteristics of the console port:

Baud Rate: 9600 bps

Data Bits: 8

Parity: none

Stop Bit: 1

Flow control: None

The settings of communication parameters

After finishing the parameter settings, click “OK“. When the blank screen shows up,

press Enter key to bring out the login prompt. Key in the “root“(default value) for the

both User name and Password (use Enter key to switch), then press Enter key and the

Main Menu of console management appears. Please see the figure as below.