Olympus C-211 - Manual (Page 99)

99
5
Special Featur
es for Polar
oid Printing
Changing the Default Caption Type
Use the following procedure to select the default caption type. The caption type you set
here will be used by default for subsequent prints—although you are free to make one-
time changes as described on page 97. This default setting is stored in the camera’s
nonvolatile memory and is not lost at power-off.
1
Open the Print menu, select , and then
select the desired caption type.
2
Press the OK button.
• The previous menu screen reappears, and
the new setting is shown in the brackets.
3
Press the OK button again.
• The camera registers the setting, and the
menu disappears.
To cancel the printout...
You can cancel at Step 2 by pressing the MENU
button (
) rather than the OK button. This will
return you to the preceding screen.
2 3
1
Including the Date, Time, or Filename on the Print (continued)
OFF
DATE
FILENAME
BACK
TIME
NEXT
Caption selection screen
1
[ TIME ]
CHANGE END
Print menu
2