Olympus C-211 - Manual (Page 39)

39
1
Getting Started
Setting the Date and Time
The camera records the time and date together with each picture that you take. Be sure
that the time and date settings are correct before taking pictures. You can adjust the
settings as follows.
1
Set the mode dial to .
• The Setup menu appears on the monitor.
If you have not yet loaded a SmartMedia
card (or if the card is loaded incorrectly)
the monitor displays the NO CARD
message instead. Load the card correctly
and then try again (see page 32).
2
Press or to move the menu pointer
to , and then press .
• The monitor displays the date-and-time
setup screen.
3
Press or as necessary to select the
pattern you wish to use for the date
display:
MDY (month.day.year)
DMY (day.month.year)
YMD (year.month.day)
• Then press to register the selection.
• The indication moves to the first date value.
1 . 1 . ’ 0 0
0 : 0 0
CHANGE
[ 2 / 2 ]
[ 30SEC ]
– M– – D– – Y–
1. 1. ’00
0: 00
OK SET BACK
2 3
Monitor (Setup menu)
Monitor
(Date/time setup screen)