Ricoh AP3800C - Manual (Page 89)

Error & Status Messages on the Control Panel
79
4
Reset Toner Cyan The indicated toner cartridge
is not set correctly. Set the indicated toner car-
tridge(s) correctly.
See "Setting Up" in the Setup
Guide.
Reset Toner Magenta The indicated toner cartridge
is not set correctly. Set the indicated toner car-
tridge(s) correctly.
See "Setting Up" in the Setup
Guide.
Reset Toner Yellow The indicated toner cartridge
is not set correctly. Set the indicated toner car-
tridge(s) correctly.
See "Setting Up" in the Setup
Guide.
Reset Transfer Unit Correctly The transfer unit is not set cor-
rectly, or is not set. Contact your sales or service
representative.
Reset Tray 1 Correctly The indicated paper input
tray is not set correctly, or is
not set. Set the indicated paper input
tray correctly.
Reset Tray Correctly The printer detected, when
processing a job through Auto
Tray Select, that any of paper
input tray is not set correctly,
or is not set. Set the indicated paper input
tray correctly.
Reset Waste Toner Correctly The waste toner bottle is not
set correctly, or is not set. Set the waste toner bottle cor-
rectly.
Reset Yellow Toner Correctly The toner cartridge (Y) is not
set correctly or is not set, and
the color printing is non-ap-
plicable. Set the toner cartridge (Y) cor-
rectly.
See "Setting Up" in the Setup
Guide.
RPCS Graphic Error The graphic is not initialized
because the graphic memory
was not reserved. Replace the installed memory.
RPCS Memory Overflow The printer memory is not ini-
tialized because the CDC
memory was not reserved via
the system call. Replace the installed memory.
RPCS Syntax Error The printer identified a syntax
error. This error results from;
data transmogrification
caused by the transmission
path problem, data interrup-
tion, data transmission from
other drivers, etc. Be sure to use the correct driv-
er.
Messages/Second messages Description Solution
JupP1k_GB_Mainte_F_FM.book Page 79 Thursday, August 22, 2002 4:23 PM