Ricoh AP3800C - Manual (Page 65)

Paper Recommendations
55
3
❖ ❖ ❖ ❖ Envelopes
Important
❒ Only envelopes A and B as shown below are supported.
*1 Misfeeds also might occur when using envelopes A and B depending on the
length and shape of the flaps.
• When printing on envelopes, use the bypass tray, and select "Thick Paper"
as a paper type in the "Paper Input" menu on the control panel.
⇒ p.67 “Specifying a paper type for the Bypass Tray”
• Specifications of envelopes are as follows:
• You can load up to 10 envelopes (72 - 92 g/m 2 , 19 - 24 lb) in the Bypass Tray
at the same time, without forcibly pressing them. Confirm that the enve-
lopes are not damp, and that the top of the stack is not higher than the limit
mark on the side guide.
• Confirm that the print side is facing up when loading onto the Bypass
Tray.
• When loading envelopes, be sure to unfold the flaps and position them op-
posite to the paper feed direction.
Supported *1
Supported *1
Not supported
Metric version Inch version
Weight 72 - 90 g/m 2 19 - 24 lb
Recommended weight
and size 72 g/m 2 , 114 × 162 mm
(C6 Env)
24 lb, 3 7 /
8
" × 7 1 /
2
"
(Monarch)
JupP1k_GB_Mainte_F_FM.book Page 55 Thursday, August 22, 2002 4:23 PM