Ricoh AP3800C - Manual (Page 48)

Cleaning and Adjusting the Printer
38
2
GGGG
Press
{{{{U U U U}}}} or {{{{T T T T}}}} to display the
paper types and resolution in
which color shifting occurs, and
then press
{{{{Enter}}}}.
Select a value from "Plain: 600dpi",
" P la i n : 1 20 0 d p i " a n d " T h i c k :
600dpi".
Note
❒ The current resolution is dis-
played on the printer driver
properties.
❒ To adjust the color registration
on thick paper, select "Thick:
600dpi" regardless of the cur-
rent resolution.
HHHH
Confirm that the following mes-
sage is displayed, and then press
{{{{Enter}}}}.
The following message appears on
the panel display. The size of the
paper loaded in step
A is shown.
IIII
Confirm that A4 L L L L or larger paper
is in the Bypass Tray, and then
press
{{{{Enter}}}}.
The Test Sheet is printed. See p.41
“Test Sheet Samples”
JJJJ
Press
{{{{U U U U}}}} or {{{{T T T T}}}} to make the off-
set settings, and then press {{{{En-
ter
}}}}.
When such a clear (not smeared in
red) square as the sample is:
• at its center position, select "0".
• shifted to the left, select "-1".
• shifted to the right, select "+1".
If you select "0: Exit", the printer re-
turns to the previous menu.
If you select "-1" or "+1", the printer
returns to step
H . Keep adjusting
until "0" is available.
KKKK
Press {{{{On Line}}}}.
"Ready " appears on the panel dis-
play.
Custom Adjust:
Plain: 600dpi
Press # for Test
Print (Bypass)
Set Sheet, then#
A3 (297 X 420)
Select Action:
0: Exit
Select Action:
-1: Re-adjust
Select Action:
+1: Re-adjust
Ready
JupP1k_GB_Mainte_F_FM.book Page 38 Thursday, August 22, 2002 4:23 PM