Ricoh AP3800C - Manual (Page 23)

Replacing the Photoconductor Unit
13
1
Important
❒ If you do not attach the green
arrow of the Photoconductor
Unit securely to the rail, you
might damage the Photocon-
ductor Unit.
❒ Do not touch the light-sensi-
tive area of the Photoconduc-
tor Unit.
E Remove the cover and push in
the Photoconductor Unit until
it stops.
IIII
Lower the inner cover slowly.
JJJJ
Tighten two screws using provid-
ed screwdriver.
Note
❒ Be sure to return the provided
screwdriver to its original posi-
tion on the back of the front cov-
er.
KKKK
Turn the light brown lever clock-
wise.
LLLL
Close the front cover slowly by
pushing the two areas on the left
and right.
ZDJX702E
ZDJH018J
ZDJH019J
ZDJH020E
ZDJH041J
JupP1k_GB_Mainte_F_FM.book Page 13 Thursday, August 22, 2002 4:23 PM