Ricoh AP3800C - Manual (Page 76)

Paper and Other Media
66
3
E Press {{{{On Line}}}}.
"Ready " appears on the panel
display.
Specifying a custom paper size for the
Bypass Tray
Important
❒ The paper size selected with the
printer driver overrides the one se-
lected with the control panel. You
do not have to make settings with
the control panel if you already
made them with the printer driver.
However, when printing with a
printer driver other than the RPCS
printer driver, you must make the
settings using the control panel.
For more information about the
printer driver, see the Help Files.
❒ The printer cannot print from ap-
plications that do not supports
custom paper size.
AAAA
Press
{{{{Menu}}}}.
"Menu" appears on the panel dis-
play.
BBBB
Press
{{{{U U U U}}}} or {{{{T T T T}}}} to display "Paper
Input", and then press {{{{Enter}}}}.
The following message appears on
the panel display.
CCCC
Confirm that "Bypass Size" is dis-
played, and then press
{{{{Enter}}}}.
The following message appears on
the panel display.
DDDD
Press
{{{{U U U U}}}} or {{{{T T T T}}}} to display "Cus-
tom Size", and then press
{{{{Enter}}}}.
The following message appears on
the panel display.
EEEE
Press
{{{{U U U U}}}} or {{{{T T T T}}}} to set the hori-
zontal value, and then press
{{{{En-
ter
}}}}.
The following message appears on
the panel display.
FFFF
Press
{{{{U U U U}}}} or {{{{T T T T}}}} to set the vertical
value, and then press
{{{{Enter}}}}.
After about two seconds, the dis-
play is returned to the menu.
Ready
ZDJS001J
Menu:
Paper Input
Paper Input:
Bypass Size
Bypass Size:
Custom Size
Custom Size:
Vert. 297mm
Custom Size:
Horiz. 210mm
JupP1k_GB_Mainte_F_FM.book Page 66 Thursday, August 22, 2002 4:23 PM