Ricoh AP3800C - Manual (Page 106)

Troubleshooting
96
4
KKKK
Close the front cover for the 2
Tray Finisher.
If the error message does not clear
even after the misfed paper is re-
moved, detach the 2 Tray Finisher
from the printer to check for the
misfed paper there.
Reference
See p.88 “Detaching the 2 Tray
Finisher” for details about how
to detach/reattach the 2 Tray
Finisher from/to the printer.
LLLL
Return the Output Tray back into
place.
A Raise the tray.
B Lower it slowly.
When "Remove Misfeed Y:
Paper Tray" Appears
AAAA
Open the Lower Right cover for
the Paper Feed Unit, and pull out
the misfed paper.
BBBB
Close the Lower Right cover for
the Paper Feed Unit.
When "Remove Misfeed
:Duplex Unit " Appears
R CAUTION:
AAAA
If the 2 Tray Finisher is installed,
detach it from the printer.
Reference
⇒ p.88 “Detaching the 2 Tray
Finisher”
ZDJP085J
ZDJP086J
• The inside of the machine be-
comes very hot. Do not touch the
parts with a label indicating a
"hot surface". Touching a "hot
surface" could result in a burn.
ZDJY209J
JupP1k_GB_Mainte_F_FM.book Page 96 Thursday, August 22, 2002 4:23 PM