Replacing consumables and maintenance kit, Detaching the sr770 (2 tray finisher) – Ricoh AP3800C User Manual

Page 11

Text mode
Original mode

1. Replacing Consumables

and Maintenance Kit

Detaching the SR770 (2 Tray Finisher)

There are times when you might have
to detach the 2 Tray Finisher from the
printer to remove misfed paper. This
section describes how to detach the 2
Tray Finisher.

AAAA

Hold the handle at the top of the 2
Tray Finisher firmly with one
hand, pull the 2 Tray Finisher
straight out, and let go when it
stops.

The 2 Tray Finisher is detached
from the printer.

BBBB

Use both hands to push it straight
back in, and let go when it clicks
into place.

The 2 Tray Finisher is reattached to
the printer.

Important

❒ Be sure to attach the 2 Tray Fin-

isher to the printer after closing
the Duplex Reversal Unit. See
p.2 “Opening and Closing the
Duplex Reversal Unit”.

ZDJP201J

ZDJP202J

JupP1k_GB_Mainte_F_FM.book Page 1 Thursday, August 22, 2002 4:23 PM