Roland RD-700NX - Manual (Page 87)

88
Connecting External MIDI Devices
Playing the RD-700NX’s Internal Sound
Generator from an External MIDI Device
Try Playing the RD-700NX from an external MIDI Device.
Making Connections
NOTE
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power on
all devices before making any connections.
MIDI IN
MIDI OUT
RD-700NX
MIDI Sequencer
1. Before starting the connection procedure, make sure that
the power to all devices has been turned off .
2. After reading “Connecting the External Equipment to
RD-700NX” (p . 15), connect an audio device/system or
headphones .
3. Connect the external MIDI device with the MIDI cable as
shown in the fi gure above .
4. As described in “Turning On the Power” (p . 17), turn on the
power of each device .
Selecting RD-700NX Sounds from an External
MIDI Device
Transmitting Bank Select (Controller Number 0, 32) and Program
Change messages from the external MIDI device to the RD-700NX
allows you to switch Live Sets and Tones.
You can download the materials on MIDI from the Roland website.
Roland website:
http://www.roland.com/