Roland RD-700NX - Manual (Page 29)

30
Performance
Changing the Tone for a Layer
1 2
3
3
1. Press the [Layer EDIT] button to access the layer edit screen .
2. Use the Cursor [
] [ ] buttons to select the layer whose tone you want to change .
Layers that have their Layer switch turned off are dimmed in the screen.
3. Use the LIVE SET buttons to select the tone category, and then use the [DEC] [INC] buttons or
the VALUE dial to select a tone .
MEMO
If you use the [ ] [ ] buttons to select a layer whose Layer switch is off (unlit), the Layer switch of the selected layer will blink. If you then press
the blinking button, that layer’s Layer switch will turn on (lit).