Roland RD-700NX - Manual (Page 66)

67
Detailed Settings for Each Function
Tuning to Other Instruments’ Pitches
(Master Tune)
For a cleaner ensemble sound while performing with one or more
other instruments, ensure that each instrument’s basic pitch is in
tune with that of the other instruments. In general, the tuning of an
instrument is indicated by the pitch in Hertz (Hz) of the middle “A”
note.
Parameter Value
Master Tune 415.3–440.0–466.2
Adjusting the Volume (Master Volume)
Adjusts the volume of the entire RD-700NX.
Parameter Value
Master Volume 0–127
Preventing Equalizer Settings from Being
Switched (EQ Mode)
You can store different equalizer settings (p. 35) for each individual Live
Set (p. 44).
This setting determines whether or not the Live Set equalizer settings
values are to be changed when Live Sets are switched.
Parameter Value Description
EQ Mode
Live Set
Equalizer settings change when
Live Sets are switched.
SYSTEM
Equalizer settings do not change
when Live Sets are switched.
Preventing Pedal Settings from Being
Switched (Pedal Mode)
Pedal settings (p. 72) can be stored for each Live Set (p. 44).
This setting determines whether or not the pedal settings are switched
to the values stored in the Live Set you are switching to.
Parameter Value Description
Pedal Mode
Live Set
Pedal settings change when Live
Sets are switched.
SYSTEM
Pedal settings do not change
when Live Sets are switched.
Assigning the Pedal Function When Pedal Mode is Set to
“SYSTEM”
When this is set to SYSTEM, “Pedal Setting” appears in the lower right
of the screen. Pressing the [TONE EDIT] (Pedal Setting) button at this
point calls up the screen for the function assigned to the pedal.
Parameter Value
Function/Parameter Setting
Changed
FC1
FC2
00: OFF No control
CC00–CC127
Controller Numbers
0–127
129:
BEND UP
The pitch will rise in the same
way as when you move the Pitch
Bend lever toward the right.
130:
BEND DOWN
The pitch will fall in the same
way as when you move the Pitch
Bend lever toward the left.
131:
AFTERTOUCH
Controls aftertouch.
132:
OCTAVE UP
Each pedal press raises the key
range in octave steps (up to 4
octaves higher).
133:
OCTAVE DOWN
Each pedal press lowers the key
range in octave steps (up to 4
octaves lower).
134:
START/STOP
The external sequencer will
start/stop.
135:
TAP TEMPO
The tempo will be modified to
the interval at which you press
the pedal.
136:
RHY PLY/STP
Starts and stops rhythms (p. 37).
137:
SONG PLY/STP
Starts and stops the song (p. 38).
138:
SONG RESET
Returns you to the beginning of
the song.
139:
MFX1 SW
Turns on/off multi-effect 1 (p. 41)
for the layer specified by MFX
Control Destination.
140:
MFX2 SW
Turns on/off multi-effect 2 (p. 41)
for the layer specified by MFX
Control Destination.
141:
MFX 1 CTRL
Adjusts the amount of
multi-effect 1 (p. 41) for the
layer specified by MFX Control
Destination.
142:
MFX 2 CTRL
Adjusts the amount of
multi-effect 2 (p. 41) for the
layer specified by MFX Control
Destination.
143:
ROTARY SPEED
When using the rotary effect,
switches the rotary effect
between slow and fast.
144:
SOUND FOCUS
Adjusts the depth of the Sound
Focus effect.