Roland RD-700NX - Manual (Page 30)

31
Performance
Adjusting the Volume Level for Individual Layers
With the RD-700NX, each of the parts that is performed using the internal sound generator is referred to as a Layer.
For each layer (UPPER 1, UPPER 2, LOWER 1, LOWER 2), you can use the Layer switch and Layer LEVEL slider to turn the sound on/off and adjust its
volume.
Layer
Switch
Layer
LEVEL
Sliders
Layer Switch
These buttons turn each layer on/off .
Layers for which the Layer switch indicator is lit (on) will produce sound when you play the keyboard.
Layers for which the Layer switch indicator is unlit (off ) will not produce sound even if you play the keyboard.
Each Layer switch will alternately turn on/off each time it is pressed.
Layer LEVEL Slider
Adjusts the volume of an individual layer.
When a layer’s Layer switch indicator is not lighted, no sound is produced for the layer even when the slider is moved.
MEMO
Use the [VOLUME] slider when adjusting the overall volume level (p. 18).
NOTE
If the CONTROL indicator is lit, you can’t use the Layer LEVEL sliders to adjust the volume (p. 73).