Panel descriptions – Roland RD-700NX User Manual

Page 10

Panel Descriptions

6. DISPLAY

This shows the Live Set names and the values of various settings, etc.
[LAYER EDIT] Button

This allows you to change the Layer settings (p. 56).
You can also use this to assign functions in some screens.
[TONE EDIT] Button

This allows you to change the tone settings (p. 54).
You can also use this to assign functions in some screens.
[DEC] Button, [INC] Button

These are used to modify values.
If you keep on holding down one button while pressing the other, the

value change accelerates.
VALUE Dial

This is used to modify values.
Cursor [

] [

] Buttons

Press these to switch pages and to move the cursor.
[EXIT/SHIFT] Button

Pressed to return to a previous screen or to cancel a procedure that is

in progress.
Additionally, you can easily call up Edit screens for related parameters

for the following functions by holding down this button while pressing

buttons, turning knobs, or operating other controllers.
[ENTER] Button

This is used to fi nalize a value or execute an operation.

7. ONE TOUCH

PIANO [CONCERT] Button, [STUDIO] Button, [BRILLIANT] Button

Selects the optimum settings for piano performances (p. 46).
E . PIANO [1] Button, [2] Button, [3] Button

Selects the optimum settings for E. Piano performances (p. 50).

8. FUNCTION

[MENU] Button

Press this button when you wish to adjust various settings (p. 65).
[WRITE] Button

Stores the current settings to “Live Set” (p. 45).
BANK [PRESET] button

Selects a Live Set from the Preset bank.
BANK [USER] button

Selects a Live Set that was saved in the User bank. Live Sets you edit

can be stored in the User bank (p. 45).

9. LIVE SET buttons

These buttons select Live Set categories (p. 27).
When you’re in an edit screen, you can use these buttons to enter

numerical values.

10. [S1] Button, [S2] Button

You can assign various functions to these buttons While performing,

you can press these buttons to use the assigned functions.

11. Pitch Bend/Modulation Lever

This allows you to control pitch bend or apply vibrato (p. 34).