Roland RD-700NX - Manual (Page 84)

85
Detailed Settings for Each Function
Restoring the Settings to the Factory
Condition
The settings stored in the RD-700NX can be returned to their factory
settings.
NOTE
• Executing “Factory Reset All” results in deletion of the Live Sets (p.
44). If you want to keep the recorded content, save the Live Set file to
your USB memory (p. 77).
• When making USB connections, be absolutely sure to disconnect
the USB cable before starting.
1. Press the [MENU] button, getting the indicator to light .
The Menu screen appears.
2. Press the Cursor [ ] [ ] buttons to select “8 .Utility,” and
press the [ENTER] button to display the Edit screen .
3. Press the Cursor [ ] [ ] buttons to select “3 . Factory Reset
Current” or “4 . Factory Reset All .”
Parameter Description
Factory Reset Current
The currently selected Live Set returned to their
factory settings.
Factory Reset All
The settings stored in the RD-700NX can be
returned to their factory settings.
NOTE
While the Factory Reset is in progress, no sounds are produced
even when the keys are pressed. In addition, Rhythms being played
are also stopped.
Factory Reset Current
4. Press the [ENTER] button .
A screen like the one shown below appears.
NOTE
If you’ve selected One Touch, the settings of the ONE TOUCH PIANO
buttons and the ONE TOUCH E. PIANO buttons will be reset.
5. Press the [ENTER] button .
The confirmation message appears.
To cancel the Factory Reset, press the [EXIT/SHIFT] button.
6. Press the [ENTER] button once again to start the Factory
Reset operation .
NOTE
Never turn off the power during Factory Reset (while “Executing...
Don’t Power Off” appears in the display).
After the Factory Reset operation is finished, the Utility screen returns
to the display.
Factory Reset All
4. Press the [ENTER] button .
A screen like the one shown below appears.
5. Press the [ENTER] button .
The confirmation message appears.
To cancel the Factory Reset, press the [EXIT/SHIFT] button.
6. Press the [ENTER] button once again to start the Factory
Reset operation .
NOTE
Never turn off the power during Factory Reset (while “Executing...
Don’t Power Off” appears in the display).
7. Switch off the power, then turn it back on again .