beautypg.com

Using the rd-700nx as a master keyboard, What’s midi, About midi connectors – Roland RD-700NX User Manual

Page 57: Midi in connector, Midi out connector, Midi thru connector

background image

58

Using the RD-700NX As a Master Keyboard

By connecting an external MIDI device to the MIDI OUT connectors on the RD-700NX’s rear panel, you can then control the external MIDI device from

the RD-700NX.
Normally, the RD-700NX will transmit note messages from the MIDI OUT connector, but if you press the [MIDI] button so the “MIDI” indicator is lit, you’ll

be able to control various settings on your external MIDI device in addition to transmitting note messages.
You can control internal and external sound generators independently.
If you press the [MIDI] button so the “MIDI” indicator is lit, the RD-700NX will be in a state where it can control an external MIDI sound module

(EXTERNAL layer). You push the [MIDI] button to switch between control of the Layer and control of the EXTERNAL layer.
You can also make detailed settings for MIDI messages transmitted to external sound modules.

What’s MIDI?

MIDI (Musical Instrument Digital Interface) is a standard specifi cation that allows musical data to be exchanged between electronic musical

instruments and computers. By using a MIDI cable to connect devices that have MIDI connectors, you can create an ensemble in which a single MIDI

keyboard can play multiple instruments, or change settings automatically as the song progresses.

About MIDI Connectors

The RD-700NX has the following three types of MIDI connector. Their functions diff er as described below.

MIDI IN Connector

Performance messages from an external MIDI device are received here. These incoming messages may instruct the RD-700NX to play sounds or switch

tones.

MIDI OUT Connector

MIDI messages are transmitted from these connectors to external MIDI devices. The RD-700NX’s MIDI OUT connectors are used for sending the

performance data of the controller section.

MIDI THRU Connector

MIDI messages received at MIDI IN connectors are re-transmitted without change from this connector to an external MIDI device. Use this in situations

such as when you use multiple MIDI devices simultaneously.

MEMO

The RD-700NX lets you switch the function of the MIDI THRU/OUT 3 connector (p. 69).

USB MIDI

connector

USB

connector

Computer

MIDI sound module

V-LINK-compatible

video equipment

MIDI IN connector

MIDI OUT connector

RD-700NX

NOTE

Use a USB Cable no longer than fi ve meters.