Getting ready, Placing the rd-700nx on a stand – Roland RD-700NX User Manual

Page 12

Getting Ready

Placing the RD-700NX on a Stand

If you place the RD-700NX on a stand, you must use the KS-G8 (sold separately). When placing the RD-700NX on the KS-G8, place it in the position

shown below.

NOTE

Using the RD-700NX with any other stand may produce an unstable situation, possibly causing the instrument to fall or overturn, and resulting in

injury or damage.
For details on how to assemble the stand, refer to the owner’s manual that accompanied the stand.

Seen from the side

Align the seam in the RD-700NX’s panel (on the

bottom, near the front) with the corners of the

stand’s rubber feet .

Seen from the rear

Align the center

screw on the

bottom of the

RD-700NX with

the center of the

stand .

NOTE

When placing the RD-700NX on the stand, be careful not to pinch your fi ngers between the instrument and the stand.