Roland JV-1010 - Manual (Page 50)

50
Editing Using Only the JV-1010
■ Tuning (Master Tune)
Allows the sound generator to be tuned. The value indicated is the
frequency of Note Number 69 (the A4 key).
fig.1-36
1
Press the VALUE knob to switch to a mode other than the
Patch mode (
PATCH ), that is, to the PERFORM , RHYTHM , or
GM mode.
2
While holding down the VOLUME knob, press the VALUE
knob.
Switch to the Edit mode.
3
Turn the CATEGORY/BANK knob to choose ETHNIC
( Master Tune ).
4
Turn the VALUE knob to adjust the tuning frequency.
The value 27.4 – 52.6 is indicated in the display.
5
While holding down the VOLUME knob, press the VALUE
knob.
The JV-1010 exits Edit mode.
3 2,5 1,4
When in the Patch mode,
you can’t enter the Edit
mode.
The hundreds place ( 4 ) is
not displayed.
For more detailed
information, refer to the
Reference Manual that is
on the included CD-ROM.