Roland JV-1010 - Manual (Page 36)

36
Changing Sounds from an External MIDI Device
Changing a Rhythm Set
When changing a rhythm set, set the transmit channel of the external MIDI
device and the receive channel of part
10 of the performance on the JV-1010
to the same channel, then transmit the Bank Select and Program Change
messages.
Now let’s try changing the rhythm set from the external MIDI device.
fig.1-23
1
Press the VALUE knob and choose the Performance mode
(
PERFORM ) or the Rhythm Set mode ( RHYTHM ).
Pressing the VALUE knob makes the mode change sequentially. Press the
knob several times until the PERFORM or RHYTHM indicator lights up.
2
Set the transmit channel on the external MIDI device to 10 .
For information on how to make the settings, refer to the owner’s manual
for the MIDI keyboard (the transmitting instrument).
3
Transmit a Bank Select MSB (Controller Number 0) value
(refer to the following table) from the external MIDI device to
the JV-1010.
4
Transmit a Bank Select LSB (Controller Number 32) value
(refer to the following table) from the external MIDI device to
the JV-1010.
1
When you first take the
unit out of the box, the
receive-channel setting for
Part 10 is 10. For more
information about part
receive-channel settings,
check out
Reference
Manual that is on the
included CD-ROM.