Roland JV-1010 - Manual (Page 49)

49
Editing Using Only the JV-1010
Quick Start
Making System Settings (SYSTEM)
This sets the tuning and other parameters of the JV-1010’s operating
environment.
fig.1-35
■ Selecting the Receive Channel (Perform Ctrl CH)
This selects the receive channel when MIDI messages are used to switch
performances.
fig.1-35a
1
Press the VALUE knob and choose the Performance mode
(
PERFORM ) or the Rhythm Set mode ( RHYTHM ).
Pressing the VALUE knob makes the mode change sequentially. Press the
knob several times until the PERFORM or RHYTHM indicator lights up.
2
While holding down the VOLUME knob, press the VALUE knob.
Switch to the Edit mode.
3
Turn the CATEGORY/BANK knob to choose SYNTH/PAD
( Perform Ctrl CH ).
4
Turn the VALUE knob to select the channel.
The value 001 – 016 , OFF flashes in the display.
5
While holding down the VOLUME knob, press the VALUE knob.
The JV-1010 exits Edit mode.
3 2,5 1,4
When in the Patch mode,
you can’t enter the Edit
mode.
For more detailed
information, refer to the
Reference Manual that is
on the included CD-ROM.