Roland DP-990 - Manual (Page 77)

77
Various Settings
Connecting the DP-990 to a V-LINK compatible image device
allows you to control the images with the DP-990.
To prevent malfunction and/or damage to speakers or
other devices, always turn down the volume, and turn off
the power on all devices before making any connections.
V-LINK
V-LINK ( ) is functionality promoted by Roland that
allows linked performance of music and visual material. By using V-
LINK-compatible video equipment, visual effects can be easily liked
to, and made part of the expressive elements of a performance.
How to Use the V-LINK
1.
Hold down the [Brilliance] button and press
the [3D] button.
The display will indicate “Fnc” and you’ll be in Function mode.
fig.d-Fnc.eps
2. Hold down the Track [Accomp] button and use the
[-] [+] buttons to make the display indicate “vLn.”
When you take your finger off the button, the display
will indicate the on/off status of the V-LINK function.
3. Press the [-] or [+] button to switch the V-LINK
function on or off.
4. Press the [Brilliance] button or the [3D] button
to execute Function mode.
The button indicator will return to its previous state.
If V-LINK is on, the bars at the bottom of the display will
be lit.
You can control images using the twelve keys at the left
end of the keyboard.
While V-LINK is switched on, no sound is produced
when you press any of the twelve keys at the left
end of the keyboard.
To disengage V-LINK, repeat steps 1–2 on the preceding
page, and choose “OFF” in step 3.
Other Settings
Using the V-LINK Function (V-LINK)
Setting Explanation
The V-LINK function is switched on.
The V-LINK function is switched off.
NOTE
C1 D1 E1 F1 G1 A0
A0 – G1#
B0
NOTE
DP-990_e.book 77 ページ ２００９年２月１７日 火曜日 午前８時３０分