Roland DP-990 - Manual (Page 53)

53
Recording
Starting Recording
5.
Press the [ ] button or play the keyboard.
After two measures of count sound, recording begins.
Recording starts when you start playing the keyboard (without pressing the [
] button). In this
case, a count is not sounded.
When recording begins, the [
] button and [ ] button will light.
During the count-in, the count measure is indicated in the display as “-2” then “-1.”
Stopping Recording
6.
Press the [ ] button.
Recording will stop.
Listening to the Recorded Performance
If the “Int Song” indicator is not lit, press the [Int Song/Ext Song] button.
7.
Press the [ ] button.
You will return to the beginning of the performance you recorded.
8.
Press the [ ] button.
The recorded performance will play back.
If you press the [ ] button while the metronome is sounding, there will be a two-
measure count (“count-in”) before playback begins.
9.
Press the [ ] button once again to stop playback.
The recorded performance will disappear when you turn off the power. If you want to
keep the performance you recorded, you must save it in internal memory or USB
memory. Refer to p. 62.
If you have not saved the performance you recorded, you won’t be able to play back
another song. You’ll have to erase (p. 59) or save (p. 62) the performance before
playing back another song.
NOTE
NOTE
DP-990_e.book 53 ページ ２００９年２月１７日 火曜日 午前８時３０分