Roland DP-990 - Manual (Page 22)

22
Before You Play
Whenever you are not using the headphones, you can hang
them on the headphone hook of the DP-990.
Attaching the Headphone Hook
1.
Press and twist the headphone hook included
with the DP-990 into the hole in the bottom left
of the DP-990 (refer to the figure below).
2. Turn the headphone hook wing nut to secure
the headphone hook.
fig.HeadphonHook.eps
Do not hang anything other than headphones on the
headphone hook. Doing so may damage the
instrument or the hook.
A song you’ve recorded on the DP-990 can be saved by
copying it to separately sold USB memory (p. 62).
You can also save songs to a floppy disk using a separately
sold floppy disk drive.
You can also play back SMF music data or audio files (p. 44)
saved on USB memory or a floppy disk.
Use USB memory and floppy disk drive available
from Roland. Proper operation cannot be
guaranteed if other USB device is used.
1. Connect the USB memory to the External
Memory connector at the right of the DP-990’s
bottom panel.
fig.ConnectUSBMem.eps
When connecting USB memory, verify that it is
oriented correctly for the external memory connector,
and firmly insert it all the way into the connector.
If you’re using new USB memory, you’ll need to
initialize (format) it on the DP-990. For details, refer
to Initializing the USB memory (p. 60).
Attach the floppy disk drive as shown the figure, using
the mounting holes on the DP-990’s bottom panel.
* For details of the attachment, refer to the owner’s manual of the
floppy disk drive.
When connecting a floppy disk drive, verify that the
plug is oriented correctly for the external memory
connector, and firmly insert it all the way into the
connector.
Using the Headphone Hook
Headphone Hook
NOTE
Using External Memory
Connecting USB Memory (sold separately)
Installing the Floppy Disk Drive (sold
separately)
NOTE
DP-990_e.book 22 ページ ２００９年２月１７日 火曜日 午前８時３０分